- Reference 4.1 Understanding a Project
- Exercise 4.1.1 Creating a Project
- Reference 4.2 Defining the Primary Storyline
- Exercise 4.2.1 Appending the Primary Storyline
- Exercise 4.2.2 Rearranging Clips in the Primary Storyline
- Reference 4.3 Modifying Clips in the Primary Storyline
- Exercise 4.3.1 Performing Insert Edits
- Exercise 4.3.2 Rippling the Primary Storyline
- Reference 4.4 Timing the Primary Storyline
- Exercise 4.4.1 Inserting a Gap Clip
- Exercise 4.4.2 Blading and Deleting
- Exercise 4.4.3 Joining a Through Edit
- Exercise 4.4.4 Refining Some Sound Bite Edits
- Reference 4.5 Editing Above the Primary Storyline
- Exercise 4.5.1 Adding and Trimming Connected B-roll
- Exercise 4.5.2 Understanding Connected Clip Sync and Trimming Behaviors
- Reference 4.6 Creating a Connected Storyline
- Exercise 4.6.1 Converting Connected Clips into a Connected Storyline
- Exercise 4.6.2 Appending Clips to a Connected Storyline
- Reference 4.7 Editing Below the Primary Storyline
- Exercise 4.7.1 Connecting a Music Clip
- Reference 4.8 Finessing the Rough Cut
- Exercise 4.8.1 Adjusting the Edits
- Exercise 4.8.2 Adjusting Clip Volume Levels
- Exercise 4.8.3 Connecting Two Additional B-Roll Clips
- Exercise 4.8.4 Refining Edits Using Cross Dissolves and Fade Handles
- Reference 4.9 Sharing Your Progress
- Exercise 4.9.1 Sharing an iOS-Compatible File
- Lesson Review
This chapter is from the book
This chapter is from the book
This chapter is from the book
Reference 4.3 Modifying Clips in the Primary Storyline
When reviewing the storyline’s flow, an additional clip or two may fill in story gaps. The flow may be disrupted by extra words or sounds at the start or end of a sound bite. Thanks to the magnetic properties of the storyline, the solutions to these problems are painless.
The append edit you performed added the selected Browser clip or clips to the end of the storyline. Sometimes a clip must be placed between those appended storyline clips. In Exercise 4.2.2, you wedged MVI_1044 between MVI_1043 and MVI_1045 when rearranging the clip order in the primary storyline. This procedure is formally called an insert edit. Browser clips may be insert edited or wedged between two storyline clips, thereby placing additional content in the middle of an existing storyline.
After the storyline clips are in order, you may need to finesse the content to enhance your story flow. The trimming tools allow you to remove or add an extra breath, sound, word, or movement within a clip. Final Cut Pro includes several trimming tools. The basic trim tool covered in this lesson is called ripple trim.
The ripple trim allows you to remove media from a project clip, frame by frame if desired. The ripple trim also allows you to insert media to a project clip.
Whether you’re performing an insert edit or a ripple trim in the storyline, the adjoining clips in the storyline stick together. Remove a clip and the subsequent clips move forward and hook up to the previous clip. Insert a clip between others and the subsequent clips move right to make room.
